Straight Razor Honing/Sharpening Service (Major Damage)

The regular charge for our Major Damage Straight Razor Sharpening Service is $60 plus shipping and tax, and is meant exclusively for razors with considerable damage, in need of major repair. 

This includes razors with chips over 1/8 inches (3.175 mm).

Unfortunately, we can not accept razors that have rust or pitting on the blade, as it makes them unable to be fully sanitized. 

When you mail in your razor, be sure to include a little note stating the scope of work to be done! We ask that you call for all major repairs, and email us a few pictures so that we can gauge the condition of your straight razor.

PLEASE NOTE: In regards to all of our honing services, we only accept straight razors purchased at The Classic Edge. In order to get razors out to customers within a reasonable time, and ensure that our returning clients remain a priority, we can unfortunately no longer accept razors bought from other stores. This difficult decision is one nearly 15 years in the making; it devastates us to do so, but continuing to accept razors not purchased from The Classic Edge, and extending the honing service turnaround time, is unfair to our own customers.

Currently, the turnaround time is 3-4 weeks. We apologize greatly for the inconvenience! Ideally, professional honing services would be offered anywhere straight razors are sold; as this is yet to be the case, we do our best to keep up!

But trust us when we say, this wait is by no means a bad thing! Proper honing is something that simply cannot be rushed, as much as we wish there was a machine that could it for us! However, due to their unique nature, different razors often require an equally different level of treatment. We consider every straight razor to have its own spirit and disposition and, because of this, give each the careful, considerate, and personal attention it deserves. 

Our experienced Honemeister, Phil, is nothing short of extreme when it comes to quality, and insists every razor he touches be made nothing shy of absolutely perfect. 

That being said, if you only have one razor, and simply cannot wait for the perfect, shave-ready straight razor you are guaranteed with our service, please do not hesitate to call us at 416-574-1592 and let us know to speed up your order if there is a rush!

About Our Service and Shipping Procedure:

Hands-down, the most important part of any straight razor, when it comes to achieving that completely clean, close, and comfortable shave, is a blade that has been sharpened to its maximum potential. We firmly believe that the key to truly enjoying the coveted art of traditional straight razor shaving, is a blade worthy of the practice. 

We understand that, while incredibly worthwhile, personally learning to sharpen your razors can be quite the investment of time and money. Instead, we have made our world-class honing service not only available, but as easy as possible; in order to ensure all of our customers are able to maintain perfectly sharpened razors, without the hassle!

Or, for those interested in learning to hone themselves, the use of our service is a great way to understand exactly what a professional-quality hone should look and feel like. In fact, we encourage all new honers to send their razors in a few times, as it provides a perfect example of a straight razor that has been made completely "Shave Ready." 

Either way, if you entrust to us this special privilege, like all other straight razors leaving the Classic Edge, we will take great care to ensure this edge is perfect in every way. As always, a final polishing will be done after honing, to give this razor the remarkable shine it had the day it came out of the factory. We also check the pivot pin for proper movement, and make sure that the blade is centered correctly; while in our hands, we take the extra time to tighten the pins, guaranteeing a smooth, freely moving blade. 

Please Ship to the following address:

The Classic Edge Shaving Store
23 College Avenue, Box 462
Port Rowan, Ontario
N0E 1M0, Canada

For razors coming from the U.S.A and all other International Countries: On the customs and declaration, please mark a low value of $10.00 and state that this purchase is a "Repair Service." Otherwise, we will be charged with customs and duties fee. Please do not state the cost of your razor!

For all customers, we do not accept cheques; please only purchase on the Classic Edge website, thank you! Keep in mind, whether in a bubble envelope or a small box, it is best to pack your razor with cardboard on each side (ideally in a coffin box), and place it in a waterproof plastic bag in order to fully protect it.

Shipping Insurance:

We know that mailing out a prized straight razor can sometimes be daunting; so, to ensure all of our customers are completely comfortable and confident when it comes to sending their razors out for sharpening, we offer a few additional shipping insurance options! The following options cover the specified amount, for their own individual fee:

Coverage up to $250 (+11 CAD)

Coverage up to $350 (+$14 CAD)

Coverage up to $450 (+$16 CAD)

Coverage up to $550 (+$18 CAD)

Coverage up to $750 (+$21 CAD)

Coverage up to $1000 (+$25 CAD)

Coverage up to $1500 (+$31 CAD)

Coverage up to $2500 (+$45 CAD)

If you don't wish to purchase any additional insurance, the regular sharpening price is also available! Without additional insurance, the regular cost will cover up to $100.

Note: We no longer hone Thiers Issard, except any purchased from us when we did sell them. Even though the quality has dropped to the point where we do not work on them or sell them, we still stand behind all past purchases. Many know Thiers has dropped in quality over the years, but it came to a point that we could not knowingly sell something that is just not up to our standards. There are many brands my competitors sell that we do not, and to be completely honest... it hurts the pocketbook missing out on these sales, but I (Phil) can sleep at night knowing I did not, and will not take advantage of a new person to the wet shaving world, that may not know that they are buying a product that does not keep an edge with regular stropping, or have needless issues like uneven bevels, warped blades, flimsy warped scales, etchings that are not straight or worst of all... metal that is too hard. Yes, 61 Rockwell is too hard for a straight razor. Don't take my word for it, ask the experts, Boker and Dovo. Companies of the past and present aim for 54 to 58 Rockwell. Being able to hone your razor easily is part of the requirement of this timeless tool. For those coming to our site looking to get your Thiers honed from another vendor, please accept my apology. Spending weekends for the last 15 years honing only Thiers razors because they are too labour-intense during the weekdays, and missing my daughter grow up and delaying my clients razors to a point that they are upset...... It was just too much...... This was the hardest decision I have made period.

TRANSLATE with x

English

Arabic	Hebrew	Polish
Bulgarian	Hindi	Portuguese
Catalan	Hmong Daw	Romanian
Chinese Simplified	Hungarian	Russian
Chinese Traditional	Indonesian	Slovak
Czech	Italian	Slovenian
Danish	Japanese	Spanish
Dutch	Klingon	Swedish
English	Korean	Thai
Estonian	Latvian	Turkish
Finnish	Lithuanian	Ukrainian
French	Malay	Urdu
German	Maltese	Vietnamese
Greek	Norwegian	Welsh
Haitian Creole	Persian

TRANSLATE with

COPY THE URL BELOW

Back

EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal

Back